You can find many different parts in pool tables. The table has a multi-layered table top that is coated with billiard cloth. Some people like to have different colors of cloth on their pool tables. This allows for a more customized experience. It also ensures that the playing surface is smooth.
The slate is the first component of a pool table. Slate is a heavy, milled stone that is used for the table's surface. Most pool tables can be made of 1" or 3/4” slate. The correct size is important if you are looking to buy a new pool table.
The rails are another vital part of a pool table. Rails can either be made of synthetic materials or natural ging. These rails are used to support the table and can be glued to it. Some rails are made from solid wood. Other materials include plywood and fiberboard.
Cushions are used for rail protection and to prevent them from being damaged. Cushions are made of vulcanized rubber or cloth. These cushions can be interchangeable with rails.
The top rail is a shorter rail that is attached to the top of the table. Side rails are shorter than the top rail and extend the length of the table. Cross beams are added to increase strength. A transition plate is often installed between the rails and the slate. A transition plate makes the table stronger.
The table's bottom rail can be found at the foot. Rail apron, a horizontal timber used to support the rails, is located at the foot of your table. Another support is the bed shelf. Both of these support are made from solid wooden pieces. Post legs are perfect legs.
Corner pockets are holes in the corners of the table. The angle of entry to the corner pockets is 142deg (+/-1deg). The opening of the corner pocket is 4 7/8 inches minimum to 5 1/8 inches maximum.
The horizontal line running horizontally across a table is the headstring. The head string starts at the second of the side pockets. The player can also draw a line in the cloth to mark where the head string begins.
The foot spot can be found at the table's end. The foot spot determines where the ball is going to land when a shooter tries to break from the ball. It is also the place where the nameplate is located.
Check the thickness of the slate when buying a new pool deck. The slate should be 1" thick. A lot of dealers sell tables with 7/8-inch slate. They may be cheaper but will not provide the same accuracy as a 1-inch slate.
Another important aspect of your pool table's cloth is its cover. Modern billiard fabric is usually made from a combination of synthetic nylon, natural wool, and synthetic polyester. Billiard felt can also be part of the cloth. Although some players prefer a particular color cloth, the cloth should be uniform and long-lasting. The cloth should be brushed at least once a month in order to preserve its quality.